Our own silicone piston V seals for the Robot - Manual Espresso Maker, same seal for the current lever groups on the market. Each Robot piston requires 1 V seal.
Please note that although the gaskets are strong under compression, you should never use a sharp tool like a screwdriver to install them. This may tear the silicone.
As with any silicone seal, you should only use food safe silicone grease to lubricate them, do not slather it on, a sheen is sufficient. Dow 111 is a good choice.
Item: Robot Piston Seal
Product size: Approx. 49.5mm (OD) 40.5mm (ID) 6.75mm (Thickness)
Product weight: Approx. 9g
Colour: Red
Material: Silicone rubber
SGS food test report: Please click hereIncluded in the package of Robot - Manual Espresso Maker?
| Regular Robot |
Yes, one installed on the piston and one spare |
| Barista Robot |
Yes, one installed on the piston and one spare |
The original stainless steel tamper will be replaced by the Robot Levelling Tamper if you upgrade it with £35.Care and use: Install the gasket as the flat side is up and the V side is down. Water leaks if the installation is incorrect.
